SoilPulse

Soil temperature, moisture and battery dashboard

🌡️

Temperature °F

💧

Moisture %RH

🔋

Battery %

No measurement received yet

Waiting for device data

Measurement history

#	Date	Temperature	Moisture	Battery
Connect a device to view history

🔒

Settings are locked

Connect a device to access calibration, temperature offset, firmware update and reset.

📦 Firmware

🎯 Sensor calibration

Improves moisture accuracy for your soil. Put the probe in the matching state, tap the button, and the device recalibrates from a fresh reading.

Connect a device to enable calibration

🌡️ Temperature offset

Trim the reading by up to ±10 ℃. Saved on the device until you reset it.

0.0 ℃

-10.0 ℃+10.0 ℃

🏷️ Device name

A display name kept on the device and shown in this dashboard. Up to 20 printable ASCII characters. It does not change the name in your phone's Bluetooth list.

ℹ️

This name is for the dashboard display only — your phone's Bluetooth list keeps the built-in name “SoilPulse”, so nothing needs to be re-paired in Home Assistant.

0 / 20 bytes

♻️ Reset

Clears history, calibration, device name and the renamed Bluetooth address (back to the factory MAC), then reboots. The connection will drop.

Welcome to SoilPulse 👋

This quick guide covers the web dashboard itself — for batteries, planting depth and hardware care, check the quick-start PDF below.

📄

Quick-start PDF

View quick-start guide →

Opens right here in the dashboard — tap Back to return; use Download to keep a copy.

Getting started

Connect — tap Connect device and pick your SoilPulse detector.

Watch — live readings, history and 5-record / 7-day trends update automatically in the Data tab. Toggle °F/°C on the temperature card; tap Refresh for an instant measurement.

Fine-tune — the Setting tab unlocks once connected: rename, calibrate, offset, firmware update or reset.

Inside the Setting tab

📦 Firmware — the badge shows the current version. When a new one is out, a NEW dot lights up on the Setting tab and an update card with “What's new” appears — tap Update now and keep the device nearby until it reboots.
🎯 Sensor calibration — probe dry in air, tap Dry calibration; then submerged in water, tap Wet calibration. A ✓ Calibrated badge marks each stored point; the device recalibrates from a fresh reading.
🌡️ Temperature offset — trim the reading by up to ±10 ℃ with the slider, then Apply offset. Kept on the device until a reset.
🏷️ Device name — up to 20 printable ASCII characters. Read from the device over GATT right after connecting and shown in this dashboard only; the Bluetooth list keeps the built-in name, so no re-pairing is needed anywhere.
♻️ Reset — clears history, calibration, name and offset, then reboots. The connection will drop.

Help

Can't connect?

Tap the touch pad to wake the sensor and keep it nearby, allow Bluetooth permissions, then tap Connect device. If this browser can't use Bluetooth, a prompt with a download link appears automatically.

No new data?

Connect and tap Refresh — new data should arrive within a few minutes.

Readings look wrong?

Redo both calibration points in Setting and check the ✓ Calibrated badges. Use Clear data to drop stale cached history, then reconnect.

Odd moisture?

Insert the probe to the OPTIMAL DEPTH line and avoid loose gaps in the soil.

Shows unavailable in Home Assistant?

This is normal. The sensor updates every 10 minutes to save power — new data will still arrive automatically.

📧

Support

Email: support@alinfancy.com

Questions or feedback? Please email us — we're happy to help. Thank you for your support!

Bluetooth is unavailable